The SmartPeg is used together with the measurement instruments Osstell Mentor or Osstell ISQ. Both instruments measure the resonance frequency of a SmartPeg, when it is attached to an implant. The resonance frequency is calculated into an ISQ-number, running from 0 to 100. The calculation is fixed and consists of a fourth-grade polynomial.

Osstell SmartPegs are delicate measurement devices. The Osstell ISQ instrument vibrates the SmartPeg through magnetic pulses and measures the resonance frequency of it. In order for the SmartPeg to function properly, it needs a firm attachment to the implant or abutment. Always check that the right SmartPeg Type is used. If there is resistance when mounting a SmartPeg, never use excessive force to screw it in that could damage the SmartPeg. If the SmartPeg threads are damaged, it is possible that the SmartPeg will not function and give false ISQ-readings. The SmartPegs are made from a soft metal with a zinc-coated magnet mounted on top of it. The SmartPegs will therefore rapidly wear after being opened. For this reason, and for hygienic reasons, the SmartPegs are disposable. The sterile package that holds the SmartPeg will hold sterility at least 5 years. The expiry date is stamped on the SmartPeg blister. During this time, it is possible that some areas on the SmartPeg will shift in color. For instance, there could be small visible spots on the SmartPeg body. These spots are an oxide and will not affect the function or sterility of the SmartPeg in any way.

Used SmartPegs should be recycled as metal.

SmartPeg functionality:

Resonance frequency & ISQ
The resonance frequency depends on the dimensions and material of the Smartpeg, and the boundary conditions between the SmartPeg and the Implant. Since the connection between the SmartPeg and the implant is good, boundary conditions means how fix the implant is the implant stability. Thus, if the dimensions and material of the SmartPeg is set, the resonance frequency of the SmartPeg will depend on only the implant stability.

Height over bone level
If the stability of the implant is measured above the bone level, it will be lower than if measured at bone level. This is because the part of the implant above bone will act as a prolonged part of the SmartPeg, and the resonance frequency (and ISQ) will therefore be lower. If there is marginal bone loss around the implant, it will show as a lower ISQ. If the implant is prolonged with an abutment the same effect will be apparent.

Different SmartPeg types:
Due to the reasons above, it is necessary that the connection between the SmartPeg and implant is good; the surfaces have to meet each other around the implant, and they should not be too large. They also have to have the right type of thread. Since implants with many different geometries are available, it is necessary to use SmartPegs that meet these criteria, and therefore a variety of SmartPeg types exist. SmartPeg types differ in length, thread type, diameter and connection surfaces some are flat and some have a conical attachment. Many implants have similar prosthetic attachments, and therefore it is sometimes possible to use the same SmartPeg type for different implant types.